Trusted ac repair for Lanett properties. Same-day service available, transparent pricing, and a workmanship guarantee.
KIC Refrigeration delivers expert air conditioning repair in Lanett, AL, diagnosing compressor failures, refrigerant leaks, frozen evaporator coils, and electrical faults using superheat, subcooling, and amp draw measurements. Our EPA Section 608 certified technicians restore rated SEER output through manufacturer-guided repair procedures across all major AC brands.
Properties throughout Lanett (pop. 6,589) face unique demands when it comes to ac repair. Alabama heating loads, cooling calculations, and the insulation levels and duct configurations found in Lanett homes all influence the approach we take. KIC Refrigeration tailors every ac repair project to the conditions your property actually faces — no generic solutions.
Choosing the right contractor for ac repair in Lanett, AL makes all the difference between efficient comfort and a system that short-cycles. KIC Refrigeration uses Manual J load calculations, installs to manufacturer specifications, and backs every project with a warranty. Call (866) 858-2961 to schedule your free assessment.
How our NATE-certified technicians deliver quality ac repair results from start to finish.
Our Lanett technician listens to your description of the problem, inspects the thermostat settings and wiring, checks the electrical disconnect and breaker, and performs a visual inspection of the outdoor condenser and indoor air handler for obvious issues like a frozen coil, tripped safety switch, or burned wiring.
KIC Refrigeration diagnoses AC failures in Lanett, AL with precision electrical and refrigerant testing. We check capacitors within 6 percent of rated microfarads, measure contactor coil resistance, verify compressor winding resistance for shorts and opens, and test the refrigerant circuit — comparing suction pressure, discharge pressure, subcooling, and superheat to the manufacturer target values for the current outdoor ambient temperature.
We replace the failed component — capacitor, contactor, fan motor, compressor, or metering device — using parts rated for your system. For refrigerant leaks, we locate the leak, repair or replace the leaking component, evacuate, and recharge the system by weight.
Our Lanett technician verifies the repair by running the AC through a full cooling cycle. We measure supply and return air temperatures at the air handler to confirm a 16 to 22 degree split, check that suction pressure produces 35 to 45 degree evaporator saturation temperature, and verify the system cycles cleanly on and off.
Transparent answers about ac repair from our certified technicians.
AC repair in Lanett typically costs $150 to $500 for common component failures including run capacitors ($150 to $250), contactors ($150 to $350), condenser fan motors ($250 to $500), and blower motors ($300 to $600). Compressor replacement is the most expensive repair at $1,500 to $3,500 depending on unit tonnage and whether the system uses R-410A or older R-22 refrigerant. Evaporator coil replacement runs $800 to $2,500 including the refrigerant recovery and recharge. KIC Refrigeration provides a detailed written estimate with itemized parts and labor costs before beginning any AC repair at your Lanett property so there are no surprises on the invoice.
An AC that runs but produces little or no cooling is most commonly caused by low refrigerant charge from a leak, which reduces the suction pressure and causes the evaporator coil temperature to drop below 32 degrees, forming ice that blocks airflow completely. Other causes include a dirty condenser coil that cannot reject heat, a failed compressor that runs but does not pump refrigerant, a stuck or failed metering device — either a TXV or fixed orifice — that restricts refrigerant flow, or a blower motor running at reduced speed due to a failing capacitor. KIC Refrigeration connects manifold gauges at your Lanett home and measures suction pressure, discharge pressure, superheat, and subcooling to diagnose the exact cause.
AC refrigerant recharge in Lanett costs $200 to $500 for R-410A systems at roughly $50 to $80 per pound, and $400 to $1,200 for older R-22 systems at $80 to $150 per pound due to the phaseout-driven supply shortage. However, simply adding refrigerant without finding the leak is a temporary and wasteful fix — the charge will leak out again in weeks or months and you will be back in the same situation. KIC Refrigeration always locates the leak first using electronic leak detectors and UV dye, repairs the leaking component, evacuates the system to remove moisture and air, and recharges by weight to the manufacturer specification. This approach fixes the problem permanently.
The industry guideline is to repair if the unit is under 10 years old and the repair costs less than 50 percent of a new system. AC units over 15 years old — especially those running R-22 refrigerant — are almost always better replaced. R-22 has been phased out of production and the remaining supply costs $80 to $150 per pound, making even minor refrigerant leaks prohibitively expensive to fix. A new 16 SEER2 system uses approximately 38 percent less energy than a 10 SEER unit, and many qualify for the federal energy tax credit. KIC Refrigeration helps Lanett homeowners evaluate repair versus replacement based on equipment age, repair history, refrigerant type, and projected energy savings.
Hear from property owners who chose us for their heating and cooling needs.
"AC repair was fast and fairly priced. The compressor was failing and they had the part on the truck. Done in about ninety minutes."
"KIC Refrigeration has serviced our commercial HVAC system for two years now. Always professional, always on time. Would not trust anyone else."
"Solid air duct repair work. They sealed up several leaks in our ductwork and airflow improved throughout the whole house. Good value."